Toward energy efficiency through an optimized use of wood: The development of natural hydrophobic coatings that retain moisture-buffering ability

The hygroscopicity of a wooden material or the ability to absorb, store and release moisture helps to naturally regulate the indoor climate by dampening humidity variations and avoiding extremes. This phenomenon, known as moisture buffering, is an energy-efficient way of moderating moisture levels in a living space, improving air quality, and influencing the health and comfort of the occupants. This work focused on developing a surface treatment that preserves the natural ability of timber to buffer moisture vapor whilst increasing the resistance to liquid water. For this purpose we suggest a method based on a natural non-continuous coating of hydrophobic Carnauba wax particles. The coating was compared, in terms of water repellency and moisture buffering efficiency, to a continuous wax film and conventional coating methods like lacquer and linseed oil. The resistance of the surfaces to liquid water was studied by Contact Angle measurement. Moisture Buffering experiments were conducted by exposing the surfaces to cyclic changes in relative humidity. It was found that coating with wax particles resulted in more hydrophobic surfaces with enhanced moisture buffering ability, whilst the rest of the coatings examined either reduced moisture buffering drastically (wax film, lacquer) or were not sufficiently hydrophobic (linseed oil).Peer reviewe

EFFECT OF POLYMER ADSORPTION ON CELLULOSE NANOFIBRIL WATER BINDING CAPACITY AND AGGREGATION

Polymer adsorption on cellulose nanofibrils and the effect on nanofibril water binding capacity were studied using cellulose nanofibril films together with quartz crystal microbalance with dissipation (QCM-D) and surface plasmon resonance (SPR). The experiments were performed in the immersed state, and special attention was paid to the effect of polymer properties on the water content and viscoelastic properties of the polymer/fibril layer. The dry mass of the adsorbed polymers was determined using SPR. The type of the adsorbed polymer strongly affected the water content and viscoelastic properties of the nanofibril film. The adsorption of a highly charged flocculating polymer, PDADMAC, caused dehydration of the film, which was also detected as nanofibril film stiffening. The adsorption of xyloglucan introduced a dispersing effect to the nanofibril film, which was detected as a loosening and softening of the nanofibril/polymer layer. A dispersing effect was also achieved with carboxymethyl cellulose (CMC), but CMC did not adsorb irreversibly on the nanofibril surfaces. In addition to the nanofibril film studies, the effect of polymer adsorption on cellulose nanofibril suspension aggregation was demonstrated using confocal laser scanning microscopy (CLSM). Xyloglucan was shown to open the nanofibril aggregate structures and act as a dispersing agent, whereas the other polymers studied did not have as significant an effect on aggregation

Durable Biopolymer Films From Lignin-Carbohydrate Complex Derived From a Pulp Mill Side Stream

Publisher Copyright: Copyright © 2021 Asikanius, Jääskeläinen, Koivula, Oinonen and Österberg.Valorization of side streams offers novel types of raw materials to complement or replace synthetic and food-based alternatives in materials science, increasing profitability and decreasing the environmental impacts of biorefineries. Lignocellulose biomass contains lignin and carbohydrates that are covalently linked into lignin-carbohydrate complexes (LCCs). In biomass fractionation processes, these complexes are conventionally considered as waste, which hinders the biomass fractionation process, and they may solubilize into aqueous effluents. This study presents how LCCs, derived from pulp mill effluent, can be turned into valuable biopolymers for industrial polymer film applications. Free-standing composite films containing hydroxyethyl cellulose (HEC) and LCCs with varying molar mass, charge density and lignin/hemicellulose ratio were prepared to study the effect of LCC amount on mechanical properties and oxygen permeability. Increasing the LCC content increased the yield point and Young’s modulus of the films. Breaking strain measurements revealed a non-linear correlation with the LCC concentration for the samples with higher lignin than hemicellulose content. The addition of LCC enhanced oxygen barrier properties of HEC films significantly even at high relative humidity. The present research demonstrates how a currently underutilized fraction of the biorefinery side stream has the potential to be valorized as a biopolymer in industrial applications, for example as a barrier film for paper and board packaging.Peer reviewe

Open coating with natural wax particles enables scalable, non-toxic hydrophobation of cellulose-based textiles

Environmental benign cellulosic textiles are hampered by their tendency to absorb water, which restricts their use in functional clothing. Herein we describe a method to functionalize textile surfaces using thin, open coatings based on natural wax particles and natural polymers rendering cellulosic fabrics water-repellent while retaining their feel and breathability. The impact of curing temperature, cationic polymer and fabric properties on wetting and long-term water-repellency were studied using contact angle measurements and scanning electron microscopy. The wetting properties were correlated to roughness of the textiles using white light interferometer. X-ray photoelectron spectroscopy revealed the surface chemical composition, leading to fundamental understanding of the effect of annealing on the wax layer. Breathability was evaluated by water vapor permeability. The optimal curing temperature was 70 °C. The developed coating performed well on different natural textiles, and better than commercial alternatives. A set of garment prototypes were produced using the coating.Peer reviewe

Effect of laminin, polylysine and cell medium components on the attachment of human hepatocellular carcinoma cells to cellulose nanofibrils analyzed by surface plasmon resonance

The development of in vitro cell models that mimic cell behavior in organs and tissues is an approach that may have remarkable impact on drug testing and tissue engineering applications in the future. Plant based, chemically unmodified cellulose nanofibrils (CNF) hydrogel is a natural, abundant, and biocompatible material that has attracted great attention for biomedical applications, in particular for threedimensional cell cultures. However, the mechanisms of cell-CNF interactions and factors that affect these interactions are not yet fully understood. In this work, multi-parametric surface plasmon resonance (SPR) was used to study how the adsorption of human hepatocellular carcinoma (HepG2) cells on CNF films is affected by the different proteins and components of the cell medium. Both human recombinant laminin 521 (LN-521, a natural protein of the extracellular matrix) and poly -L-lysine (PLL) adsorbed on CNF films and enhanced the attachment of HepG2 cells. Cell medium components (glucose and amino acids) and serum proteins (fetal bovine serum, FBS) also adsorbed on both bare CNF and on protein-coated CNF substrates. However, the adsorption of FBS hindered the attachment of HepG2 cells to LN-521and PLLcoated CNF substrates, suggesting that serum proteins blocked the formation of laminin-integrin bonds and decreased favorable PLL-cell electrostatic interactions. This work sheds light on the effect of different factors on cell attachment to CNF, paving the way for the utilization and optimization of CNF-based materials for different tissue engineering applications. (C) 2020 The Authors. Published by Elsevier Inc.Peer reviewe

Understanding hemicellulose-cellulose interactions in cellulose nanofibril-based composites

Plant-based polysaccharides (cellulose and hemicellulose) are a very interesting option for the preparation of sustainable composite materials to replace fossil plastics, but the optimum bonding mechanism between the hard and soft components is still not well known. In this work, composite films made of cellulose nanofibrils (CNF) and various modified and unmodified polysaccharides (galactoglucomannan, GGM; hydrolyzed and oxidized guar gum, GGhydHox; and guar gum grafted with polyethylene glycol, GG-g-PEG) were characterized from the nano- to macroscopic level to better understand how the interactions between the composite components at nano/microscale affect macroscopic mechanical properties, like toughness and strength. All the polysaccharides studied adsorbed well on CNF, although with different adsorption rates, as measured by quartz crystal microbalance with dissipation monitoring (QCM-D). Direct surface and friction force experiments using the colloidal probe technique revealed that the adsorbed polysaccharides provided repulsive forces–well described by a polyelectrolyte brush model – and a moderate reduction in friction between cellulose surfaces, which may prevent CNF aggregates during composite formation and, consequently, enhance the strength of dry films. High affinity for cellulose and moderate hydration were found to be important requirements for polysaccharides to improve the mechanical properties of CNF-based composites in wet conditions. The results of this work provide fundamental information on hemicellulose-cellulose interactions and can support the development of polysaccharide-based materials for different packaging and medical applications.Peer reviewe

Occurrence of Reverse Side Effects in Corona Treatment of Dispersion-Coated Paperboard and Its Influence on Grease Barrier Properties

The uncoated side of dispersion-barrier-coated paperboards was exposed to positive and negative direct current corona treatments in order to confirm the occurrence of backside treatment and clarify its effects on the usability of the paperboard. The main component of the coating dispersions was hydroxypropylated potato starch and the effects of talc and styrene-butadiene latex additions on backside treatment were evaluated. Coatings with a high talc proportion showed excellent initial grease resistance, but corona-induced strikethroughs caused a drastic decrease in grease penetration time. The root-mean-square roughness measurements revealed moderate surface roughening at the backside, indicating thus backside treatment. The alterations in surface free energies and rapeseed oil contact angles confirmed the occurrence of backside treatment. The high polarization potential of latex played a key role in these observations. At the same time, the inertity of talc had a stabilizing effect but it did not prevent backside treatment completely. X-ray photoelectron spectroscopy results verified that backside treatment occurs also when the barrier-coated side of the substrate is treated with corona, indicating that a dispersion coating layer does not prevent this undesired phenomenon. Bearing in mind that expressing customized information or including personalized elements in food packages or disposable cups and plates is under great interest, it can be assumed the exposure of packaging materials to corona will become more common in the near future, and the need for optimizing bio-based packaging materials for such purposes is obvious

Quantified forces between HepG2 hepatocarcinoma and WA07 pluripotent stem cells with natural biomaterials correlate with in vitro cell behavior

In vitro cell culture or tissue models that mimic in vivo cellular response have potential in tissue engineering and regenerative medicine, and are a more economical and accurate option for drug toxicity tests than animal experimentation. The design of in vivo-like cell culture models should take into account how the cells interact with the surrounding materials and how these interactions affect the cell behavior. Cell-material interactions are furthermore important in cancer metastasis and tumor progression, so deeper understanding of them can support the development of new cancer treatments. Herein, the colloidal probe microscopy technique was used to quantify the interactions of two cell lines (human pluripotent stem cell line WA07 and human hepatocellular carcinoma cell line HepG2) with natural, xeno-free biomaterials of different chemistry, morphology, and origin. Key components of extracellular matrices -human collagens I and IV, and human recombinant laminin-521-, as well as wood-derived, cellulose nanofibrils -with evidenced potential for 3D cell culture and tissue engineering- were analysed. Both strength of adhesion and force curve profiles depended on biomaterial nature and cell characteristics. The successful growth of the cells on a particular biomaterial required cell-biomaterial adhesion energies above 0.23 nJ/m. The information obtained in this work supports the development of new materials or hybrid scaffolds with tuned cell adhesion properties for tissue engineering, and provides a better understanding of the interactions of normal and cancerous cells with biomaterials in the human body.Peer reviewe

Quantifying the interactions between biomimetic biomaterials - collagen I, collagen IV, laminin 521 and cellulose nanofibrils - by colloidal probe microscopy

Biomaterials of different nature have been and are widely studied for various biomedical applications. In many cases, biomaterial assemblies are designed to mimic biological systems. Although biomaterials have been thoroughly characterized in many aspects, not much quantitative information on the molecular level interactions between different biomaterials is available. That information is very important, on the one hand, to understand the properties of biological systems and, on the other hand, to develop new composite biomaterials for special applications. This work presents a systematic, quantitative analysis of self- and cross-interactions between films of collagen I (Col I), collagen IV (Col IV), laminin (LN-521), and cellulose nanofibrils (CNF), that is, biomaterials of different nature and structure that either exist in biological systems (e.g., extracellular matrices) or have shown potential for 3D cell culture and tissue engineering. Direct surface forces and adhesion between biomaterials-coated spherical micro-particles and flat substrates were measured in phosphate-buffered saline using an atomic force microscope and the colloidal probe technique. Different methods (Langmuir-Schaefer deposition, spin-coating, or adsorption) were applied to completely coat the flat substrates and the spherical micro particles with homogeneous biomaterial films. The adhesion between biomaterials films increased with the time that the films were kept in contact. The strongest adhesion was observed between Col IV films, and between Col IV and LN-521 films after 30 s contact time. In contrast, low adhesion was measured between CNF films, as well as between CNF and LN-521 films. Nevertheless, a good adhesion between CNF and collagen films (especially Col I) was observed. These results increase our understanding of the structure of biological systems and can support the design of new matrices or scaffolds where different biomaterials are combined for diverse biological or medical applications.Peer reviewe

Synthesis of an Azide- and Tetrazine-Functionalized [60]Fullerene and Its Controlled Decoration with Biomolecules

Bingel cyclopropanation between Buckminster fullerene and a heteroarmed malonate was utilized to produce a hexakis-functionalized C-60 core, with azide and tetrazine units. This orthogonally bifunctional C-60 scaffold can be selectively one-pot functionalized by two pericyclic click reactions, that is, inverse electron-demand Diels-Alder and azide-alkyne cycloaddition, which with appropriate ligands (monosaccharides, a peptide and oligonucleotides tested) allows one to control the assembly of heteroantennary bioconjugates.Peer reviewe